|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
| Home>Technology Available for Commercialization |
|
|
|
|
| Adhesives |
|
1. Manufacture of Urea formaldehyde resin
2. Manufacture of Urea Melamine formaldehyde resin
3. Manufacture of Phenol formaldehyde resin
4. Manufacture of Phenol Melamine formaldehyde resin
5. Phenol resorcinol formaldehyde resin
6. Resorcinol formaldehyde resin
7. Phenol formaldehyde resin for gluing preservative treated veneers
for BWR grade plywood
8. Low temperature/fast curing two stage PF resin
9. Manufacture of light coloured Phenol formaldehyde resin for teak
veneer overlay on plywood
10. Cardanol Phenol Formaldehyde Resin
11. Sealants for plywood
12. Fast curing PF resin |
|
 |
|
|
| Process Development (Wood composite) |
|
1. Pre-pressing technique for plywood manufacture
2. Dual cycle hot pressing process to reduce compression loss and blisters in plywood
3. Galvanized iron overlaid plywood
4. Semi exterior grade UF bonded Plywood
5. Veneer Peeling and Slicing Techniques for manufacture of plywood
6. Slit method of veneer tenderising
7. Finger jointing of veneer
8. Laminated Veneer Lumber |
|
|
| Non wood Product Composites |
|
1. Rice husk particle board – Technology transfer through NRDC
2. Bamboo Mat Board
3. Bamboo Mat Veneer Composite
4. Bamboo Mat Moulded Trays
5. Bamboo Mat Based apple packing cases
6. Bamboo Mat Corrugated Sheets
7. Bamboo Wood (Laminates)
8. Designs for the construction of affordable houses. The roofing is
from Bamboo Mat Corrugated Sheet supported on Bamboo trusses
and columns.
9. Bamboo Match Sticks
10. Pine Needle Particle Board |
|
 |
|
|
| Solid Wood Products |
|
1. Design of Sawmills – small/medium for processing small diameter logs
2. General improvements in the existing sawmills for higher recovery
3. Technologies for processing small diameter plantation species for production of quality sawn
timbers (Eucalyptus, Silver Oak, Rubber Wood, Coconut Wood, Palm Wood)
4. Glued Laminated Wood: Technology for Finger Jointed & Glued Laminated Wood from
plantation timbers suitable for door and window frames, columns and beams etc.
5. Design & Construction of Glued plywood components for structural application – Web
beams, Stressed Skin Roofing, Walling & Flooring, Kiosks/Mini structures, Prefabs, Bins etc.,
6. Products from Finger Jointed Wood
7. Door panels, furniture from finger jointed & laminated wood etc.
8. Plywood sub-floor for Rail coaches
9. Glued Plywood Mini Structure |
|
|
| Enhanced Service Life |
|
1. End-coats to protect green veneer logs from end-cracking and end coating in cold form
2. Protective measures for plywood against insect/ borers
3. Prophylactic protective treatment for veneers during storage and transit
4. Protective treatment methods for plywood using chlorinated hydrocarbon in the glue line
5. Protection of plywood using organophosporous compound in the glue line
6. Treatment schedules for veneers, plywood and core stock of flush doors/block boards using
sodium borate compound
7. Economical treatment method for veneers and plywood made of non-durable and
imported
species with NaTCP (Sodium trichlorophenate)
8. Remedial treatment against insect attack on wood and wood based panels in storage |
|
| Instrumentation |
|
1. Electronic Clipper Control System for the Indian Plywood Industry
2. Peeling lathe setting Instruments:-
¨ Knife angle Indicator
¨ Horizontal Gap Indicator
¨ Knife Height Gauge
¨ Micro bevel device
3. Saw doctoring Techniques for TCT circular saws & stellite tipped band saws.
4. Temperature Indicator for Plywood Hot Presses |
|
|
| |
|
|
|
|
|
|
|
|
|
